GF-4 Mineral Water Cup Washing Filling Sealing Machine is specially customized for water cup packing. The machine can be used in a variety of applications for the beverage industry, such as pure water, mineral water, juice, milk, yogurt and more.
Depending on the output required, the GF Series Cup Washing Filling and Sealing Machine can be designed for 2 lines, 4 lines, 6 lines, 8 lines, 10 lines per time or more.
Machine basic function include cup de-nesting, washing, filling, heat sealing, automatic feed-out.
Machine Specifications:
Cup De-nesting System
Washing System:
Automatic Filling System: the filling quantity and speed could be adjusted. The filling system could be designed based on product feature.
Automatic Sealing System: independent temperature controller
1st sealing: heat sealing
2nd sealing: could be designed in Embossing sealing
Eye Mark Auto Correction
Collocating with a photocell sensor of film pattern mark
Automatic Cutting System: waste film automatic rewinding
Product Automatic Feed-out System: with conveyor
Operation Panel:
A-Type: Traditional Switches and Buttons for simple operation
B-Type: Touch Screen
Variable speed adjustment via speed controller arrange with inverter
Additional emergency stop switch for safety protection
Parts Specifications
Machine Frame: Stainless Steel in accordance with sanitation standard
Bottom Mold: Anodized Aluminum Alloy
Pneumatics Parts Brand: AirTac
PLC Brand: MITSUBISHI
Model | GF-2 | GF-4 | GF-6 | GF-8 | GF-10 |
Production capacity | 1600-2000 cups/h | 3000-4000 cups/h | 5000-6000 cups/h | 7000-8000 cups/h | 9000-10000 cups/h |
Filling range | 50-300ml or customized | ||||
Voltage | Single phase 220V, 3 phase 220V 3 phase 380V/400V/415V 50Hz/60Hz | ||||
Power | 2KW | 3.5Kw | 5 Kw | 6 Kw | 7.5 Kw |
Air consumption | 0.6 mз/min | 0.8 mз/min | 1 mз/min | 1.2 mз/min | 1.6 mз/min |
Dimension | 2400×650×1750 mm | 2800×710×1700 mm | 2800×850×1700mm | 3000×900×1700mm | 3000×1000×1700mm |
Weight | 600Kg | 700Kg | 800Kg | 1000Kg | 1200Kg |
Machine Frame: Stainless Steel
Bottom Molds: Aluminum Alloy
PLC: Mitsubishi
Cylinder: AirTac
Solenoid valve: Mindmand
Switch: IDEC
Operation panel: Touch Screen
Servo motor driving
Intelligent design in the case of no cup, the machine will not automatically fill and seal.
Empty cup de-nesting function: according to different cups, some can be designed with vacuum sucker which can guide the cup enter into mold accurately.
Empty cup detecting function: no cup no filling or no cup machine stops
Filling: cup lifting function
Filling tank: level control, CIP washing ball
Foil Storage Device
Foil sensor for detect the film when it ran out, the machine will stop automatically
Blank Film Fixer: to calculate the film length of cup for saving the film cost
Eye Mark Auto Correction: Collocating with a photocell sensor of film pattern mark
Color ribbon date printer for roll film
Automatic Capping System: put plastic cap after sealing
Safety protection: it is optional function, it make up by plexi-glass, aluminium and stainless steel, has safety switches which protect the operator.
square cup
round cup