Publish Time: 2022-08-05 Origin: Site
The cup filling and sealing machine can be widely used in product packaging in medicine, daily chemical and other industries. This article will introduce the relevant knowledge of the cup filling and sealing machine, I hope it will be helpful to everyone.
Maintenance of cup filling and sealing machine.
The company has cup filling and sealing machine products.
The repair of the cup filling and sealing machine is divided into overhaul, intermediate repair and maintenance.
1. Overhaul
Under normal circumstances, the cup filling and sealing machine is overhauled once every two years. Every part of the cup filling and sealing machine must be removed, all bearings are replaced, and the gears with serious wear are replaced to prevent the gap from being too large and increasing the sealing machine. Noise and affect the quality of double hemming. Check whether the wear of the stroke track is serious, repair it if it is minor, and replace it if it is severe. Check each screw of the cup filling and sealing machine for slippage. If so, replace the old oil in the reducer in time, drain all the old oil, clean the reducer, and replace with new oil. If there is a problem with the reducer of the cup filling and sealing machine that cannot be repaired, it needs to be replaced. Whether the wheel and other parts are damaged, if so, repair it if it can be repaired, or replace it if it cannot be repaired. When disassembling the cup filling and sealing machine, make a mark and place it in order; be sure to seat it properly when installing; clean it strictly when assembling, and dry it before oiling and assembling. No matter disassembling or assembling the cup filling and sealing machine, it is strictly forbidden to knock it strongly. After installation, check the cup filling and sealing machine comprehensively: check whether all fasteners are tightened; check whether the running channel of the can is unblocked, it is strictly forbidden to store foreign objects in the channel, and it is strictly forbidden to leave maintenance tools; check whether the direction of the motor is running Meet the requirements. Before starting the cup filling and sealing machine, it should be started and then run at a low speed to check whether the rotating parts have abnormal noise; whether the screw, puller, guide plate, tank holder and other positions are aligned; after everything is normal, the speed can be gradually increased , Until the required speed is reached.
Wenzhou Chunlai Packaging Machinery Co., Ltd. focuses on manufacturing intelligent, elegantly designed and high-quality packaging machinery. From small manual operations to high-speed automatic machines, we provide the most advanced technologies on the market, including manual tray tray sealing machines, automatic tray and cup tray sealing machines, rotating cup tray sealing machines, linear continuous motion tray sealing machines, and improved conventional Press packaging (MAP), bottle filling and capping machine, cup filling and sealing machine, etc.
If you are satisfied with our company's cup filling and sealing machine, you can directly order or consult the cup filling and sealing machine related issues. We will provide you with the best cup filling and sealing machine products and services. Looking forward to your visit, I wish us success in our work.