Operating Regulations of tray sealing machine

The tray sealing machine seals the container filled with packaging. After the product is put into the packaging container, in order to seal the product, maintain product quality, and avoid product loss, the packaging container needs to be sealed. This article will introduce the relevant knowledge of the tray sealing machine, I hope it helps.

The operating procedures of the tray sealing machine.

The tray sealing machine products owned by the company.

The operating procedures of the tray sealing machine.

1. Process operation method of tray sealing machine

①. Press the "ON" button for the tray sealing machine, the power indicator light and "COOLER" (cooling indicator light) will light up, and the warning light will flash.

②. Press the "Start" button for the tray sealing machine, the warning light is off, the "START" indicator light is on, and the power is preset.

③. The tray sealing machine turns on the power of the conveyor belt, the conveyor belt runs, and the speed knob is adjusted to the appropriate position.

④. If the tray sealing machine is over-current during operation, the “FAULT” (over-current indication) light on the control panel will be on and the warning light will flash. At this time, press the “RESET” button and wait for the over-current light to go out. Press the "START" button again.

2. Precautions and daily maintenance during the operation of the tray sealing machine

①. The tray sealing machine uses 220V single-phase three-wire power supply, and the grounding must be reliable, otherwise it will affect personal safety.

②. Frequently check the cooling water level of the tray sealing machine. When it is used frequently, check it once a week and add cooling water.

③. Frequently check the tray sealing machine pipelines, and the joints must not leak or seep.

④. Maintenance should follow the operating sequence of the tray sealing machine.

⑤. The repair and maintenance of the tray sealing machine should be fixed by professionals.

⑥. It is not allowed to open the case of the tray sealing machine after starting up, and the main power supply must be cut off during inspection and maintenance.

⑦. The tray sealing machine is designed with overload and overheat protection system.

The tray sealing machine products owned by the company.

Wenzhou Chunlai Packaging Machinery Co., Ltd. focuses on manufacturing intelligent, elegantly designed and high-quality packaging machines. From small manual operations to high-speed automatic machines, we provide the most advanced technology on the market, including manual tray tray sealing machines, automatic tray and cup nesting tray sealing machines, rotating cup tray sealing machines, linear continuous motion tray sealing machines , Improved atmospheric packaging (MAP), bottle filling and capping machine, tray sealing machine, etc. The tray sealing machine includes: rotary tray sealing machine, linear filling and packaging machine, continuous motion tray sealing machine, etc.

If you are satisfied with our company's tray sealing machine, you can directly order or consult related questions about the tray sealing machine. We will provide you with the best tray sealing machine products and services. We look forward to your visit and wish our work smoothly.