The tray sealing machine seals the container filled with packaging. After the product is put into the packaging container, in order to seal the product, maintain product quality, and avoid product loss, the packaging container needs to be sealed. This article will introduce the relevant knowledge of the tray sealing machine, I hope it helps.
Precautions for the use of the tray sealing machine.
The company owns the tray sealing machine products.
Precautions for the use of the tray sealing machine.
1. Before the tray sealing machine is powered on, the induction aviation plug must be inserted and the screws must be tightened.
2. The tray sealing machine uses a single-phase three-wire power cord, and the floor of the workplace must be dry to maintain insulation.
3. The tray sealing machine is equipped with an automatic protection function for overheating. If the temperature inside the machine is overheated, the buzzer inside the machine will beep for a long time, and the yellow indicator light will be on. The main power switch should be turned off, and the cooling buzzer will stop in standby, and then continue to work. .
4. During the working process of the tray sealing machine, you should always touch the surface of the induction head to check whether it is overheated. If you find that your hand is hot, stop heating and wait for it to cool down (the power supply can be turned off), and the "WARMUP" green indicator light When it is off, do not press the start button to avoid false triggering.
5. The tray sealing machine is equipped with a 5A fuse, which cannot be replaced by a fuse greater than 5A.
6. There is high voltage in the tray sealing machine, and the bottom plate is charged.
7. Before using the tray sealing machine, if there is any exposed wires, stop using the machine and wait for repairs before using it.
In addition, the tray sealing machine must be cleaned and maintained regularly.
1. Method of cleaning the toothed knife: first plug the two drain holes of the lower mold with a cotton ball, pour boiling water into the groove of the lower mold, fill it up, and then push it in.
The tray sealing machine products owned by the company.
Wenzhou Chunlai Packaging Machinery Co., Ltd. focuses on manufacturing intelligent, elegantly designed and high-quality packaging machines. From small manual operations to high-speed automatic machines, we provide the most advanced technology on the market, including manual tray tray sealing machines, automatic tray and cup nesting tray sealing machines, rotating cup tray sealing machines, linear continuous motion tray sealing machines , Improved atmospheric packaging (MAP), bottle filling and capping machine, tray sealing machine, etc. The tray sealing machine includes: rotary tray sealing machine, linear filling and packaging machine, continuous motion tray sealing machine, etc.
If you are satisfied with our company's tray sealing machine, you can directly order or consult related questions about the tray sealing machine. We will provide you with the best tray sealing machine products and services. We look forward to your visit and wish our work smoothly.